Skip to content
Change Wi-Fi Password

How to change the WiFi password of the Globe router?

By installing an internet connection in your home or office, the server will provide you with a standard user configuration, which makes your Wi-Fi network an easy-to-access connection.

Cybercriminals can access your network

Based on the standard configuration provided by the server, it is very simple for these virtual criminals to sabotage your router’s Wi-Fi signal, connecting to your network without permission and without paying any price for it.

The best way to end this problem is by changing your username and setting a personal password, this way you will avoid any unwanted access to your connection.

Tips globe wifi modem

Changing the Globe modem configuration

Make sure you are connected to your Wi-Fi and that your router / modem is correctly connected and you can be using the phone or the PC.

The steps to change the username and password are:

Prolink H5004NK / Tattoo Prepaid / Postpaid pocket

  1. Go to your Web browser in adress bar write: “http://192.168.254.254/.
  2. Press the “Setup” in the lower right.
  3. In User Name type “admin” and in Password “3UJUh2VemEfUtesEchEC2d2e” if it does not work write in both “user” (without quotation marks) and just click “OK”.
  4. Go to “Setup” in the top menu and touch “WLAN” on the left and then in “Security”.
  5. In the “Pre-Shared Key” field, enter your new key for your wireless network.
  6. Finish the procedure with “Apply Changes” .

Huawei B315s – 936, 938

  1. Launch the IP address: “http://192.168.254.254/”.
  2. Click on “Log In” in the upper lateral menu.
  3. Fill user name “user” and password “@l03e1t3” and press “Log In”.
  4. Touch on “Advance” in the top menu and then in “WLAN” on the left and in the drop-down menu “WLAN Basic Settings”.
  5. In the “SSID” field you can add a network name and in “WLAN key” your new password.
  6. End by pressing “Apply”.

Huawei t@ttoo @home 4G LTE

  1. Go to: “http://192.168.254.254/”.
  2. In User name enter “user” and Password “@l03e1t3” and click “Login”.
  3. Then go to “Wi-Fi” and press and scroll down.
  4. “SSID” is the name of your wifi and you can change it.
  5. In the “WPA-PSK” field you can change your key.
  6. Click in “Submit” and your done and wait.

ZTE ZXHN H108N V2.5

  1. Type the URL: “http://192.168.254.254/” or “http://192.168.1.1/”.
  2. Click on “Login” in the gray menu.
  3. Enter default Username and Password: “user” or for Username “admin” and Password any of these: “BAYANDSL”, “BayanDSL”, “bayandsl”, “B4Y4NT3L”, “admin”.
  4. Go to the “Network” tap in the left menu and select “Security”.
  5. In the “Choose SSID” field you can change the name of your network and in “Passphrase” your new pass.
  6. After that click in “Submit”.

ZTE MF612

  1. Launch the URL “http://192.168.1.1/”.
  2. In the box User fill “user” for User Name and Password.
  3. Click on “Basic Status” and then “Wi-Fi Setting” in the left menu.
  4. Tap in “Security” and modify your pass in “WEP Key 1”.
  5. End by pressing “Apply”.

At Home Prepaid

  1. Enter in the adress bar “http://192.168.254.254/” in your preferred browser.
  2. Tap “Log In” on the right menu.
  3. The User name and Password you can find them back on the sticker of router.
  4. Click on “WiFi Settings” on the top.
  5. Then In “SSID” you can add a new name and in “WPA pre-shared key” you can modify the current password.
  6. Finally press “Apply”.

Huawei Home Broadband

  1. Type: “http://192.168.254.254/”.
  2. Select “Log In”.
  3. Fill in User name “user” and Password “@l03e1t3”.
  4. Go to “WiFi Settings”.
  5. You can now change your wifi name and key in the box “SSID” and “WPA pre-shared key”.
  6. Just click “Apply” button if you are done.

If you forgotten the password, does not work or it has no signal, you can reset, try the following:

  1. In the hole behind the router just press it for about 5 to 10 seconds with a clip or a needle, then release.
  2. Now try again from the first step with default password.

HG180

  1. Go to IP “http://192.168.1.1/” in your chrome, firefox or Mac Browser.
  2. Type in Username “admin” and Password “aisamin” and click “Login”.
  3. Select “Basic setup” in the left menu then “WLAN” and “Basic configuration 2.4 GHz”.
  4. In the box “SSID” you can modify your Wi-Fi name.
  5. For change the key tap “Basic Setup” on the left then “WLAN” and “Security Setting 2.4 GHz”.
  6. In “WPA Preshare key” field add a pass.
  7. Touch “Apply” to finish.

Aztech DSL 5001EN / 5018EN / 5068EN – 1T1R

  1. Launch your web browser with “http://192.168.254.254/” or “http://192.168.0.1/”.
  2. Click in “Login” in the upper left menu.
  3. Fill Username with “user” and Password “user” or “3UJUh2VemEfUtesEchEC2d2e” and press “Login”.
  4. Tap “Wireless” and then “Security” button.
  5. In “Pre-Shared Key” you can enter a new one.
  6. Finish with “Apply”.

Pocket Huawei E5573Cs 933 / 90E2 (Using the cell phone)

  1. You have to download and install the App “HUAWEI HiLink” with App store or Play store.
  2. Select “Start”.
  3. Click in “Gear” button in the upper right menu.
  4. Tap on the router model in “My Wi-Fi”.
  5. In “Wi-Fi name” and “Password” field you can modify it.
  6. When you finish a message will appear “Message” press “Ok”.

Tattoo LTE Pocket E5330 / e5220

Method 1:

  1. Go to URL: “http://192.168.1.1/” or “http://192.168.8.1/” or “http://192.168.0.1/”.
  2. Fill in both “admin”.
  3. Select “Settings” in left menu.
  4. Then “System” and “Modify Password” on the left.
  5. And just click “Apply”.

Method 2:

  1. Type the adress: “http://192.168.8.1/”.
  2. Enter “admin” in both boxes.
  3. Touch “Quick Setup” -> Page: “User Settings” press “Next”.
  4. Page: “Internet Connection” tap “Next”.
  5. Then “Wireless Settings”.
  6. You can change the “Password Name (SSID)” and “Password” and click “Next”.
  7. To finish on the page “Device Placement Guidelines” ends with “Finish”.

Method 3 (Reset):

  1. When the device is connected, remove the back cover.
  2. Then, with a stick or needle press the button where it says “RESET”.
  3. Wait 3 to 5 seconds until the lights flash and then you will be ready.

Related Posts